The TA-2 Turntable mounts up to two tonearms and supports 232mm and 298mm of either B or P Series arms.

Details

• Dual Plinth with Brass (top) and Copper (bottom) Resonance Tuned Three Ply Bamboo Laminate 19.5mm
• Twin 24 Pole Synchronous AC Motors (220V/50Hz)
• Brass Pulleys
• Dual Motor Belt Drive
• 33.3 & 45 rpm
• Three Ply Bamboo Laminate 19.5mm with Copper Inlay and Bronze Ingot Inset Platter 2.5kg
• Removable Spindle to Decouple Record and Platter from Bearing Shaft
• Brass Sub Platter with Polished Steel Shaft, ABEC7 Carbonized Ceramic Ball Bearing and Bronze Sleeve (Ø 38.0mm) Held with Aluminium Adjustable Lock Collar
• Sorbothane® Paded Leveling Legs on Solid Bamboo Diamonds Set on Three Brass Ball Bearings
• All Bamboo Soaked in Hemp Oil and Sealed in Beeswax

B-Series TA-2 with 232mm and 298mm B-Series Arms, without Cartridge              (Art. No. 9408II) Price 4,585.00 €*
B-Series TA-2 with 232mm B-Series Arm, without Cartridge                                      (Art. No. 9408) Price 3,525.00 €*
B-Series TA-2 without Arm, without Cartridge                                                              (Art. No. 10725) Price 2,730.00 €*

The B-Series TA-2 Tonearm features the same, handmade bamboo design as our table. It is available together or separately in a 232mm or 298mm version, and also can replace the arm of most other tables, with convenient matching screw holes to Rega® tonearm.

Details

• Unipivot Arm built of Three Ply Bamboo Laminate, Pressure Treated in Hemp Oil and Sealed in Beeswax
• Removable Headshell
• Cardas Wire 33 AWG Uninterrupted from Headshell to RCA with Inkol® Tubing, MuMetal and Brass Shilding
• Silver Plated Cartridge Clips
• VTA and Azimuth Adjustments
• Anti-Skating Mechanism
• Pin & Grease Bearing with Brass xx.xg – VTA Adjustable Spike with Bronze Cup, Lithium Grease Damped
• One Piece Anodized Machined Aluminium Arm Plinth, Hand-Brushed with Brass RCA Sitting on Bamboo Base
• Tonearm Lock Down

B-Series TA-2 232mm Arm (Art. No. 10726) Price 880.00 €*
B-Series TA-2 298mm Arm (Art. No. 10727) Price 1,060.00 €*

Details

• 2 x Moving Coil Transformers
  • Provides 20dB of Gain for Low Output Moving Coil Cartridges
  • Impedance Ratio: 1:100
  • Frequency Response: 20Hz/20kHz: -0.19dB/-0.02dB
  • Faraday and Double Magnetic Shields Provide Immunity to Hum and RF Interference
  • Transformers Mounted on Bamboo Plinth, Isolated from Main Cabinet via 6 Sorbothane® Pads for Total Isolation
• 2 x Passive Isolating Transformers for Balanced Signal Output Through RCA
  • Eliminates Hum and Buzz Associated with Ground Loops
  • Helps to Extend Frequency Response
  • Shielded in Mu-METAL to Protect Against External Magnetic Fields and Prevent Contamination Due to Ultrasonic and RF Interference
• Solid Brass Input and Output Connectors
• Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
• Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
• Sorbothane® Paded Bamboo Cup Isolation Feet

B-Series MC Step Up Transformer (Art. No. 9400) Price 1,685.00 €*

Provides better support to records. This clamp steadies the record, as well lends the unique acoustic qualities of copper, brass and bamboo to the sound of your system.

Details

• Solid Machined Copper Body with Brass Inner Core
• Bamboo 45 Adaptor Ring Inlaid
• Adaptor Ring Soaked in Hemp Oil and Sealed in Beeswax
• Dimensions H 2.5cm Ø 4.9cm Weight 0.3kg

B-Series Bronze Record Clamp (Art. No. 7227) Price 205.00 €*

The P-Series TA-1 Turntable’s is designed for audio enthusiasts at a competitive, cost-sensitive price level. Plinth and the in hemp oil pressure treated platter and tonearm are built of three ply bamboo laminate, all sealed in beeswax. It offers excellent sound definition and imaging. This turntable accommodates the 232mm P or B-Series tonearm only. Our bamboo design is unique, and has been a featured product in audio shows since 2012.

“… this table sounds like what you would get for north of $5k, and made my copy of Buena Vista Social Club At Carnegie Hall come to life from the very beginning.”

Spencer Holbert  – The Absolute Sound (2014)

Details

• 19.5mm Brass Resonance Tuned Three Ply Bamboo Laminate Plinth
• Single 24 Pole Synchronous AC Motor (220V/50Hz)
• Brass Pulley
• Belt Drive
• 33.3 & 45 rpm
• 19.5mm Three Ply Bamboo Laminate Platter 0,9kg
• Removable Spindle to Decouple Record and Platter from Bearing Shaft
• Aluminium Sub Platter with Polished Steel Shaft, ABEC7 Carbonized Ceramic Ball Bearing and Bronze Sleeve (Ø 20.0mm) Held with Aluminium Adjustable Lock Collar
• Sorbothane® Paded Leveling Legs on Solid Bamboo Cups
• All Bamboo Soaked in Hemp Oil and Sealed in Beeswax

P-Series TA-1 with 232mm Arm, without Cartridge (Art. No. 7225) Price 1,860.00 €* P-Series TA-1 without Arm, without Cartridge (Art. No. 7223) Price 1,450.00 €*

The P-Series TA-1 Tonearm features the same, handmade bamboo design as our table. It is available separately and can also replace the arm of most other tables, with convenient matching screw holes to Rega® tonearm. The 232mm version mounts on both P- and B-Series. The 298mm version does not mount on the P-Series Turntable!

Details

• Unipivot Arm built of Three Ply Bamboo Laminate, Pressure Treated in Hemp Oil and Sealed in Beeswax
• Fixed Headshell
• Cardas Wire 33 AWG Uninterrupted from Headshell to RCA with Inkol® Tubing, MuMetal and Brass Shilding
• Silver Plated Cartridge Clips
• VTA and Azimuth Adjustments
• Anti-Skating Mechanism
• Pin & Grease Bearing with Bronze 11.5g – VTA Adjustable Spike, Lithium Grease Damped
• One Piece Anodized Machined Aluminium Arm Plinth, Hand-Brushed with Brass RCA Sitting on Bamboo Base
• Tonearm Lock Down

P-Series TA-1 232mm Arm (Art. No. 7228) Price 495.00 €*                                     P-Series TA-1 298mm Arm (Art. No. 10721) Price 640.00 €*

Details

• Moving Magnet (MM) and Moving Coil (MC)
• 12V DC Linear Power Supply (External)
• Inputs 1 RCA MC <-toggle switch-> 1 RCA MM
• Output 1 RCA
• MC 3 Gain Settings (4 Impedance Settings, JFET  Design (50/100/250/1KΩ))
• MM 2 Gain Settings (3 Impedance Setting to 50K, OP-AMP Design (0/3/6dB))
• Internal Housing with 1/8″ Steel Shielding Box Grounded to Keep RF Out
• Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
• Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
• Sorbothane® Paded Bamboo Cup Isolation Feet

P-Series Phono MM+MC (Art. No. 16714) Price 560.00 €*

The clamp provides paramount support for records, as well as lends the unique acoustic qualities of natural bamboo and brass to your system.

Details

• Machined Brass Core
• Clamp Functions as a 45 Adaptor
• Bamboo Body Soaked in Hemp Oil and Sealed in Beeswax
• Dimensions H 2.0cm Ø 4.5cm Weight 0.04kg

P-Series Record Clamp (Art. No. 7231) Price 130.00 €*

The S-Series TA-0.5 Turntable is designed for audio enthusiasts at an entry price point for first time vinyl experience. Plinths, Platter and Tonearm are built of three ply bamboo laminate, are pressure treated in hemp oil and sealed in beeswax. The voicing of this table is the same as it’s lager counterpoints however presents a smaller soundstage. Available as stand alone or with a built in MM phono section. It is equipped with a MM cartridge in any case. S-Series TA-0.5 is our entry level turntable. Choose in-between the elementary and the plug and play version including cartridge and built in Phono Pre-Amp (MM).

Details

• 19.5mm Brass Resonance Tuned Three Ply Bamboo Laminate Plinth
• Single 24 Pole Synchronous AC Motor (220V/50Hz)
• Brass Pulley
• Belt Drive
• 33.3 & 45 rpm
• 19.5mm Three Ply Bamboo Laminate Platter 0.8kg
• Removable Spindle to Decouple Record and Platter from Bearing Shaft
• Aluminium Sub Platter with Polished Steel Shaft, ABEC7 Carbonized Ceramic Ball Bearing and Bronze Sleeve (Ø 12.0mm) Held with Aluminium Adjustable Lock Collar
• Sorbothane® Paded Leveling Legs on Solid Bamboo Cups
• All Bamboo Soaked in Hemp Oil and Sealed in Beeswax

S-Series TA-0.5 with 232mm Arm, Cartridge and built-in MM Phono (Art. No. 20490) Price 1,380.00 €*                                                                                                         S-Series TA-0.5 with 232mm Arm, without Cartridge and without Phono (Art. No. 19417) Price 965.00 €*

Details

• Moving Magnet (MM) Only
• 12 Volt DC Powered
• Internal Housing with 1/8″ Steel Shielding Box Grounded to Keep RF Out
• Bamboo Cabinet, Soaked in Hemp Oil and Sealed in Beeswax, Hand-Brushed Aluminium Front and Back Plate
• Packed with Unbleached Natural and Fire Resisting Sheep’s Dampening Wool
• Sorbothane® Paded Bamboo Cup Isolation Feet

S-Series MM Phono Pre Amp (Art. No. 28217) Price 350.00 €*

Tonearm Auto Lift based on bamboo stand

Details

• Brass Lift
• Bamboo Soaked in Hemp Oil and Sealed in Beeswax
• Dimensions H 0.0cm Ø 0.0cm Weight 0.0g

Tonearm Auto Lift (Art. No. 28217) Price 345.00 €*